The KMC Controls BAC-5051AE is a multi-port BACnet router. It is powerful enough for heavy network traffic and small enough to use as a control technician’s service tool. Routing: Install the BAC-5051AE for BACnet IP, Ethernet, and MS/TP routing. IP routing is fully compliant with BACnet Standard 134-2012, Annex J.
Features Include:
- Easy To Install And Simple To Configure
- Supports BACnet IP Pad Routing
- Direct Serial Or Direct Modem Point-To-Point Connection
- Conforms To ANSI/ASHRAE Standard 135-2001.
KMC BACnet Router - Features & Overview
Browser Configuration: Configure the BAC-5051AE using only an Internet browser. There is no special software to learn or load.Flexible Mounting: Two mounting choices for permanent installations–DIN rail or surface mount.
Diagnostics: Embedded metrics include: total number of devices, frame counts, frames in error, data frames, duplicate MAC addresses, token passing, and poll-for-master count.
The Best Tool in your Tool Box
MS/TP Diagnostics Capture: Troubleshoot MS/TP issues by capturing, saving, and analyzing network traffic. Data is saved in industry standard .pcap files.
Automatically Learns Networks: Detects and configures routing for the actual discovered networks.
Enable and Disable Routing: Use the router as a diagnostic tool to monitor traffic without routing traffic.
VAV Airflow Balancing: Use with an Internet browser as an airflow balancing tool for BAC-8000 and BAC-9000 series VAV controllers.
AFMS Configuration: Use the router to set up an Airflow Measurement System (AFMS).
Zone Configuration: Use the router to set up a BAC-120063CWZEC zoning Flexstat.
Routing Protocols:
- One MS/TP Network
- One BACnet Ethernet
- (2) IP Ports that can be setup for any of the following protocols:
- Normal BACnet IP network routing
- BACnet broadcast management device with network and port address translation
- Foreign device registration with BACnet broadcast management device (BBMD)
- PAD (Packet Assembling/Disassembling) Routing