.png)
Governor Line of Regulators
Governor, Over-Pressure-Devices, and Dual Cut Regulators
General Information:
Safe, Reliable, and High Performance
- Internal vent limiter: non removable, for indoor and outdoor installations.
- External vent limiter for indoor installations.*
- Double diaphragm for added safety and greater reliability of service.
- Balanced valve design gives you for increase capacity, high 500:1 turndown and stable regulation from low to high flow.
- Complete lockup in absence of gas flow, bubble tight shutoff.
*As Approved by Local Codes and Standards
Governor 2 PSIG
Main Features:
- CSA 6.22a-2005 ANSI Z21.80A2005 Class I for outlet pressures up to 14" W.C. Certified.
- Integral Vent Limiter
- External Vent Limiter - no vent line required**
- Positive dead-end lockup
- Inlet and Outlet test ports
- 500 to 1 Turndown
Governor OPD 5 PSIG
Main Features:
- CSA Certified to ANSI Z21.80A2005
- CSA 6.22a-2005 Class I for outlet pressures up to 14" W.C.
- CSA 6.22a-2005 Class II for outlet pressures up to 1 PSIG
- Integral Vent Limiter
- External Vent Limiter - no vent line required**
- Positive dead-end lockup
- Inlet and Outlet test ports
- 500 to 1 Turndown
Governor DC 10 PSIG
Main Features:
- CSA Certified to ANSI Z21.80A2005
- CSA Certified 6.22a-2005 ANSI Z21.80A2005 Class I for outlet pressures up to 1 PSIG and inlet pressures up to 10 PSIG
- CSA Certified 6.22a-2005 ANSI Z21.80A2005 Class II for outlet pressures up to 1 PSIG and inlet pressures up to 10 PSIG
- Integral Vent Limiter
- External Vent Limiter - no vent line required**
- Positive dead-end lockup
- Inlet and Outlet test ports
- 500 to 1 Turndown
Specifications :
- Suitable for use with Natural Gas, LPG and any non-corrosive clean gas
- Inlet pressure: 3" W.C. to 2 PSIG; Max. Inlet: 7.25 PSIG for non-CSA applications
- Outlet pressure: 2" W.C. to 14" W.C.
- Standard outlet spring range from: 2" W.C.-4.26 PSIG
Specifications:
- Suitable for use with Natural Gas, LPG, and any non-corrosive clean gas
- Inlet pressure: 7" W.C. to 5 PSIG; Max. Inlet 7.25 PSIG for non-CSA applications
- Connections: 1/2" through 2"
- Maximum Emergency Inlet Exposure Pressure: 80 PSIG
- Suitable for Indoor or Outdoor Installation
- OPD Outlet Spring Range: 2" W.C.-4.26 PSIG
Specifications:
- Suitable for use with Natural Gas, LPG, and any non-corrosive clean gas
- Outlet pressure: 2" W.C. to 14" W.C. for CSA Class I
- Outlet pressure: 2" W.C. to 1 PSIG for CSA Class II
- Outlet pressure: 2" W.C. up to 4.25 PSIG for non-CSA
- Inlet Pressure: 3 PSIG to 10 PSIG
- Max. Inlet 10 PSIG for CSA and non-CSA
- Connections: 1/2" through 2"
- Maximum Emergency Inlet Exposure Pressure: 80 PSIG
- Suitable for Indoor or Outdoor Installation
- OPD Outlet Spring Range: 2" W.C.-4.26 PSIG
Heavier Duty Regulator Options:
Norval Series
Norval pressure regulators are direct-acting devices for low and medium pressure applications controlled by a diaphragm and counter spring.
These regulators are suitable for use with pre-filtered, non-corrosive gases.
Dival 500 Series
The DIVAL 500 series of spring loaded, diaphragm controlled balanced plug gas regulators are suitable for low, medium and high pressure.
Divals and shut-off device series regulators are supplied with internal sensing lines. Both the regulator and the shut-off device are preset for optional connection to an external sensing line by the customer.
Divals and shut-off device series regulators are supplied with internal sensing lines. Both the regulator and the shut-off device are preset for optional connection to an external sensing line by the customer.
They are widely used in both civil and industrial installations using Natural Gas, LPG and other non-corrosive gases.
Dival 600 Series
Dival 600 series pressure gas regulators are direct-acting devices for low and medium pressure applications controlled by a diaphragm and counter spring.
The modular design of the Dival 600 series pressure regulators allows the installation of an incorporated slam shut or device for use as an 'in line monitor' on the same body without changing the face-to-face dimension.
Furthermore the truly 'top entry design' allows easy regular maintenance without removing the unit from the line. The features of Dival 600 series regulators make them a product suitable for any application.
The modular design of the Dival 600 series pressure regulators allows the installation of an incorporated slam shut or device for use as an 'in line monitor' on the same body without changing the face-to-face dimension.
Furthermore the truly 'top entry design' allows easy regular maintenance without removing the unit from the line. The features of Dival 600 series regulators make them a product suitable for any application.