Browse Categories

A Comprehensive Guide to Subnetting: Tips, Tools, and Best Practices

network

What is a Subnet?

A subnet is a logical division of a larger network, such as an Internet Protocol (IP) network. Subnets are created by breaking the network into smaller segments, each with its own range of IP addresses. The process of dividing a network into subnets is called subnetting.


Creating a subnet on an Operational Technology (OT) network involves several key steps to ensure the new subnet is properly integrated and secure. 

Here’s a General process that can help guide you through creating a subnet on an OT network:

1. Planning the Subnet
  • Define Purpose: Determine the specific purpose of the subnet, such as isolating specific devices, improving network performance, or enhancing security.
  • IP Addressing Scheme: Decide on the IP addressing scheme, including the subnet mask, range of IP addresses, and any reserved addresses for gateways, servers, etc.
  • Security Requirements: Identify security requirements specific to OT networks, such as compliance with standards like IEC 62443, and plan for network segmentation to limit access.

2. Designing the Subnet

  • Network Topology: Design the network topology, including the placement of switches, routers, and other networking devices.
  • VLAN Configuration: If using VLANs, plan the VLAN IDs and configure VLAN tagging to segregate network traffic.
  • Routing and Gateway: Decide on the routing strategy and configure the gateway for the subnet to communicate with other subnets and the broader network.

3. Configuring Network Devices
  • Switches and Routers: Configure switches and routers with the new subnet information. This includes setting up VLANs if applicable and configuring routing protocols.
  • Firewalls and Access Control: Implement firewall rules and access control lists (ACLs) to control traffic to and from the subnet. Ensure only authorized devices and users can access the subnet.

4. Implementing the Subnet
  • IP Assignment: Assign IP addresses to devices within the subnet, either statically or via DHCP.
  • Device Configuration: Configure devices within the subnet with the correct IP addresses, subnet mask, gateway, and DNS settings.
  • Network Services: Ensure essential network services (e.g., DHCP, DNS, NTP) are configured and accessible within the subnet.

5. Testing and Validation
  • Connectivity Testing: Test connectivity within the subnet and to external networks. Use tools like ping, traceroute, and network scanners to verify network paths.
  • Performance Testing: Assess the performance of the subnet to ensure it meets the required standards for latency, throughput, and reliability.
  • Security Testing: Conduct security assessments to check for vulnerabilities and ensure compliance with security policies.

6. Monitoring and Maintenance
  • Network Monitoring: Implement network monitoring tools to continuously monitor the health and performance of the subnet.
  • Log Management: Collect and analyze logs from network devices and security appliances to detect and respond to potential issues.
  • Regular Audits: Perform regular network audits and security assessments to ensure the subnet remains secure and efficient.



Posts

2024
November October September August July June May April March February January
2023
December November October September August July June May April March
2022